Manufacture: Arrow Pneumatics
Model Number: 9052-10
This Hydraulic in-line filter provides protection for small, high pressure systems up to 3,000 PSI. By using this filter at the pressure side of a pump, foreign particles 25 microns and larger, such as those created by pump wear, are removed before damage can result to the valving in the system. A sintered bronze element ensures protection agaisnt crushing should dirt accumulate and increase pressure drop across the element.
The unique construction features an anodized aluminum housing for light weight, and a conically shaped sintered bronze element positioned by a retaining spring to allow true, uninterrupted axial flow. Special vition O-rings are available for oil systems where chemical action may be a problem. The standard 25 micron bronze filter element can be easily cleaned or replaced. Nominal filtration ratings of 90, 40, or 10 microns are available.
|
Specifications |
|
Maximum Operating Pressure |
• 3000 PSI |
|
Operating Temperature |
• 35°F to 200°F |
|
Viton Temperature |
• 35°F to 400°F |
|
Part No. |
NPT |
Overall Length |
Diameter |
Weight Lbs. |
|
9052-10 |
1/4" |
3 1/4" |
1 1/2" |
.46 |
.gif)
