SUNSEP-W ^tM
Membrane Air Dryers

At the heart of the SUNSEP-W ™ brand membrane air dryer technology is the patented membrane fibers developed by Asahi Glass Company (AGC) which has nearly 40 years of experience in the separation of gases with membranes. 

The Sunsep drying process works by passing compressed air inside the hollow fiber membranes where the water vapor molecules permeate through the wall of the membrane leaving the oxygen and nitrogen molecules to exit the outlet as dry air. The permeated water vapor is then swept away by a small amount of dry air fed back over the outside of the membrane fibers through a purging valve or orifice.

Specifications: 

			SCFM		Weight	DIMENSIONS (INCHES)
TYPE	SUNSEP #	Port size	IN	OUT		In/Out	H	D	PURGE CONTROL
BARREL TYPE	SWB-01-100	1/4"	3.8	3	0.49	9.4	1.3	1.3	External Valve or Orifice
BARREL TYPE	SWB-01-200	1/4"	6.3	5	0.51	13.4	1.3	1.3	External Valve or Orifice
BARREL TYPE	SWB-02-100	3/8"	8	6.4	1.39	12.2	2	2	External Valve or Orifice
BARREL TYPE	SWB-05-100	3/8"	13.2	10.6	1.48	12.2	2	2	External Valve or Orifice
CASSETTE TYPE	SWC-M04-70	M5	0.6	0.5	0.11	1.4	3	0.6	External Valve or Orifice
CASSETTE TYPE	SWC-M08-100	1/8"	0.9	0.7	0.57	2.4	4.4	1.2	Internal Fixed
CASSETTE TYPE	SWC-M15-100	1/8"	1.5	1.1	0.6	2.4	4.4	1.2	Internal Fixed
CASSETTE TYPE	SWC-01-150	1/4"	4.7	3	0.93	2.8	5.9	1.6	Variable Three Position
CASSETTE TYPE	SWC-02-250	3/8"	6.8	5	1.52	3.9	7.9	2	Variable Three Position
CASSETTE TYPE	SWC-03-250	3/8"	9.6	7	1.56	3.9	7.9	2	Variable Three Position
FLEXIBLE TYPE	SWF-M06-400	1/4"	1.25	1	0.22	18.8	1	1	External Valve or Orifice

• SCFM ratings are at 100psig and +70F to +75F inlet temperature. Outlet Dewpoint is +35F to +30F, or lower.
• Changing the inlet or outlet flow, the pressure or the temperature will vary the outlet dewpoint.
• Maximum operating pressure is 120psig
• Operating temperature range is +32F to 130F.
• There is no significant loss of oxygen in the drying process.
• Above data is average performance rates, individual units can vary.